Of large size, the Eco-65 pellet stove is ideal for heating spaces up to 2,600 ft². It features intuitive electronic control and simple to use thermostatic control. Cleaning is a breeze, with access to components that are removable without tools. Certified at 2.45 g/h, the Eco-65 produces up to 65,400 BTU/h and provides clean and efficient heating.
Included: 4'' Vortex pellet vent basement kit (one stove adapter, one 3"Ø to 4"Ø increaser stove adapter, two tees with cap, four pipe lengths: 12", 18", 24" and 36", one slip (adjustable section) - 9"L, two 90° elbows, one wall pass-thru, two wall supports and one jet cap), blower, ceramic glass, ash lip
- - Burn time up to 104 hours
- - Hopper capacity of 125 lb
- - Bottom-feed burner
- - CSAB415.1-10 certified (Canada only)
- - Proudly made in Canada
- - Limited lifetime warranty
- - Certified for mobile home installation
- - Weight : 480 lbs
Options: wall thermostat, fresh air intake kit, heat distribution kit, stand alone auxiliary discharge tank, storage tank with pneumatic self-feeding pellet system, storage tank extension
|Fuel type (11)||Pellet (Premium grade or better)|
|Recommended heating area (9)||800 - 2,600 ft²|
|Hopper capacity||125 lb (57 kg)|
|Maximum burn time (9)||104 h|
|Maximum heat input rate (4)||65,400 BTU/h (19 kW)|
|Minimum overall heat output rate (5)||8,300 BTU/h (2.4 kW)|
|Maximum overall heat output rate (5)||36,700 BTU/h (10.8 kW)|
|Minimum average overall efficiency (HHV) (6) (8)||68.8 %|
|Maximum average overall efficiency (LHV) (6) (7)||74.4 %|
|Optimum efficiency (2)||79.9 %|
|Burn rate||1.2 - 7.6 lb/h|
|Average particulate emission rate (3)||2.45 g/h|
|Average CO (10)||117.2 g/h|
|Average electrical power consumption for ignition cycle (1)||3.7A (360 W)|
|Average electrical power consumption for continuous operation (1)||2.15A (258 W) -2.9A (348 W)|
|Alcove installation approved||No|
|Mobile home approved||Yes, with fresh air intake|
|High-efficiency certified appliance||CSA B415.1-10 only approved for Canada|
|Baffle type||Stainless steel|
|Flue outlet diameter||4"|
|Type of chimney||ULC/ORD-C441, CAN/ULC S609, UL 641 (TYPE L)|
|Overall dimension (Width)||24"|
|Overall dimension (Height)||41 1/8"|
|Overall dimension (Depth)||34 1/4"|
|Premium quality blower included (CFM)||500 CFM included|
|Voltage and frequency||120 VAC - 60 Hz|
|Number of intensity levels||Variable|
|Noise level at 6 feet||53 dBa (+/- 3 dBa) - 59 dBa (+/- 3 dBa)|
|Door type||Single, glass with cast iron frame|
|Glass type||Ceramic glass|
|Glass surface - W x H||13 7/8" x 9 3/8"|
|Canadian Standard (emissions)||CSA B415.1-10|
|Canadian Standard (safety)||ULC S627|
|USA Standard (safety)||UL 1482, ASTM E1509|
|Certified according to applicable standards||By an accredited laboratory (CAN/USA)|
|Shipping weight||440 lb (200 kg)|
CLEARANCE TO COMBUSTIBLES*
|Clearance - Back wall||3"||3"|
|Clearance - Side wall||6"||6"|
|Clearance - Corner||3"||3"|
|Clearance - Base of the unit to ceiling**||72"||72"|
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
1. Unless stated otherwise, measures were taken directly at the main power source and include all electrical components present in the appliance.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. Based on the maximum burn-rate and a dry energy value of pellet at 8,600 BTU/lb.
5. As measured per CSA B415.1-10 stack loss method.
6. Efficiency based on radiated and delivered heat when allowing cycling from high to low burn to simulate thermostat demand.
7. Lower Heating Value of the fuel.
8. Higher Heating Value of the fuel.
9. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
10. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel type, feed rate, fuel level, and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature considering that the space configuration and the presence of heat distribution systems have a significant impact in making heat circulation optimum.
11. Carbon monoxyde.
12. Grades of pellet fuel are determined by organizations such as Pellet Fuels Institute (PFI), ENplus and CANplus.