In stock
Qty: 16

Please note that all heaters will be delivered via curbside delivery.
* Some conditions apply. Please read our shipping policy.


Only available in Canada

Of extra large size and ideal for spaces up to 2,400 ft², the HT-2000 is a wood stove with an impressive output of 100,000 BTU/h. CSA B415.1-10 certified for Canada only, the reputation of the HT-2000 is well established: the favorite stove of wood-burning enthusiasts for nearly 30 years! Its very large combustion chamber allows logs to be loaded across width or depth.

Included: pedestal with ash drawer, ceramic glass, ash lip, air damper

▪ Up to 10 hours burn time
▪ Up to 22" logs
▪ 3.7 ft³ firebox
▪ Heavy duty 5/16" steel top
▪ Insulated top panel for added durability
▪ CSA B415.1-10 certified (Canada only)
▪ Proudly made in Canada
▪ Limited lifetime warranty

Any installation must be done according to the data and drawings detailed in the owner’s manual.



Fuel type Dry cordwood (16" recommended)
Recommended heating area (8) 1,000 - 2,400 ft²
Overall firebox volume 3.7 ft³
Maximum burn time (8) 10 h
Maximum heat output-dry cordwood (4) 100,000 BTU/h (29.3 kW)
Minimum overall heat output rate (4) (5) 11,600 BTU/h (3.4 kW)
Maximum overall heat output rate (4) (5) 60,200 BTU/h (17.6 kW)
Average overall efficiency-EPA cribs (HHV) (5) (6) 63 %
Average overall efficiency-EPA cribs (LHV) (5) (7) 67 %
Optimum efficiency (1) (2) 78 %
Average particulate emission rate (3) 3.8 g/h
Average CO (9) 176.1 g/h
Size Extra Large
Premium quality blower included (CFM) Optional
Certified according to applicable standards By an accredited laboratory (CAN/USA)
Combustion technology Non-catalytic
Stainless-steel secondary-air system Yes
Flue outlet diameter 6"
Distance-center of the flue outlet to back unit 6 3/8"
Distance-center of the flue outlet to side unit 14 1/8"
Chimney diameter 6"
Type of chimney CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height 12'
Overall dimension (Width) 28 1/8"
Overall dimension (Depth) 29 3/8"
Overall dimension (Height) 34 3/8
Door type Single, glass with cast iron frame
Door opening size (Width) 17 7/8"
Door opening size (Height) 8 7/8"
Glass type Ceramic glass
Glass surface - W x H 16 3/8" x 9 5/8"
Firebox size (Width) 22 7/8"
Firebox size (Height) 13 1/2"
Firebox size (Depth) 20 5/8"
Maximum log length 22"
Log positioning Loading over width or depth
Firebox lined with refractory bricks Yes
Baffle type C-Cast or equivalent
High-efficiency certified appliance CSA B415.1-10 only approved for Canada
Canadian Standard (emissions) CSA B415.1-10
Canadian Standard (safety) ULC S627
Steel thickness-body 3/16"
Steel thickness-top 5/16"
Warranty Limited lifetime
Shipping weight 487 lb (221 kg)


Applies to 84" ceiling installation only.
See user manual for other installation requirements.

Canada United States
Single wall pipe  Double wall pipe Single wall pipe Double wall pipe
Clearance - Back wall 19" 10" 19" 14"
Clearance - Corner 11" 8" 84" 84"

*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.

1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
5. As measured per CSA B415.1-10 stack loss method.
6. Higher Heating Value of the fuel.
7. Lower Heating Value of the fuel.
8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
10. Carbon monoxyde.

Reviews 5

Write Your Own Review
You're reviewing:HT2000 WOOD STOVE
Your Rating