
Get $10 off for each additional item added to your cart.
Another great reason to shop at MFP!
Is this wood stove qualified for a Tax Credit?
Consult the eligible models list.
Everything you need to know about the 26% Tax Credit :
It covers the cost of the appliance, chimney, air distribution ducts, labor for installation and related material.
Learn more
Another great reason to shop at MFP :
Get $10 off for each additional item added to your cart.
Please note that all heaters will be delivered via curbside delivery.
* Some conditions apply. Please read our shipping policy.
Entirely made of cast iron, the Cape Town 1800 is ideal for heating up to 2000 sq² with its 75,000 BTU/h of maximum power. Certified at 1.8 g/h, this non-catalytic unit is the only Drolet model to offer a flue outlet at the back and on the top of the stove. The Cape Town 1800 has a large viewing area as well as a full width andiron to hold logs during loading. Its classic design and distinguished cast iron finish give it all its charm.
Included: ash drawer, ceramic glass, ash lip, broad-spectrum air damper
Options: heat shield
SPECIFICATIONS
Fuel type | Dry cordwood (16" recommended) |
Recommended heating area (9) | 500 - 2,000 ft² |
Overall firebox volume | 2.0 ft³ |
EPA loading volume | 1.55 ft³ |
Maximum burn time (9) | 8 h |
Maximum heat output-dry cordwood (4) | 75,000 BTU/h (22 kW) |
Minimum overall heat output rate (4) (5) | 13,784 BTU/h (4.04 kW) |
Maximum overall heat output rate (4) (5) | 57,684 BTU/h (16.91 kW) |
Average overall efficiency-dry cordwood (HHV) (5) (6) | 71 % |
Average overall efficiency-dry cordwood (LHV) (5) (7) | 76 % |
Optimum efficiency (1) (2) | 78 % |
Optimum heat transfer efficiency (8) | 77 % |
Average particulate emission rate (3) | 1.81 g/h |
Average CO (10) | 120 g/h |
Size | Large |
Alcove installation approved | Yes |
Premium quality blower included (CFM) | No |
Certified according to applicable standards | By an accredited laboratory (CAN/USA) |
Combustion technology | Non-catalytic |
Flue outlet diameter | 6" |
Distance-center of the flue outlet to back unit | 4 1/8" |
Distance-center of the flue outlet to side unit | 15 3/8" |
Chimney diameter | 6" |
Type of chimney | CAN/ULC S629, UL 103 HT (2100 °F) |
Minimum chimney height | 12' |
Overall dimension (Width) | 30 3/4" |
Overall dimension (Depth) | 22 5/8" |
Overall dimension (Height) | 32 5/8" |
Door type | Single, glass with cast iron frame |
Door opening size (Width) | 22" |
Door opening size (Height) | 9 1/2" |
Glass type | Ceramic glass |
Glass surface - W x H | 20 1/2" x 12" |
Firebox size (Width) | 21 7/8" |
Firebox size (Height) | 9 1/2" |
Firebox size (Depth) | 13 1/4" |
Maximum log length | 21" |
Log positioning | Loading over width |
Firebox lined with refractory bricks | No |
Baffle type | High quality vermiculite |
High-efficiency certified appliance | CSA B415.1-10 only approved for Canada |
Canadian Standard (emissions) | CSA B415.1-10 |
Canadian Standard (safety) | ULC S627 |
USA Standard (safety) | UL 1482 |
Warranty | Limited lifetime |
Shipping weight | 545 lb (247 kg) |
Distance-center of the flue outlet to floor | 26 3/4" |
Moulded refractory panels | Yes |
CLEARANCE TO COMBUSTIBLES*
Applies to 84" ceiling installation only.
See user manual for other installation requirements.
Canada | United States | |||
Single wall pipe | Double wall pipe | Single wall pipe | Double wall pipe | |
Clearance - Back wall | 18" | 10" | 16" | 16" |
Clearance - Corner | 16" | 8" | 84" | 84" |
*The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
**Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
1. Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
2. Optimum overall efficiency at a specific burn rate (LHV).
3. This appliance is officially tested and certified by an independent agency.
4. The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
5. As measured per CSA B415.1-10 stack loss method.
6. Higher Heating Value of the fuel.
7. Lower Heating Value of the fuel.
8. The optimum heat transfer efficiency is for the low burn rate (using HHV) and represents the appliance’s ability to convert the energy contained in the solid fuels into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion.
9. Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
10. Carbon monoxyde.